Can you put an epoxy floor over concrete?
Epoxy coatings are normally applied over concrete floors to provide a high-performance, smooth, and durable surface that can last many years and withstand heavy loads.
How do you prepare a concrete floor for epoxy?
To finish preparing an uncoated concrete floor, you need to etch, acid wash or grind the floor, as a smooth floor will not allow the epoxy to adhere well. You can rent a sand blaster or diamond grinder and rough up the surface. Or you can etch, or acid wash, the floor using a product designed for concrete floor prep.
How do you apply epoxy to concrete?
How to use two-part epoxy adhesive for concrete
- Safety and tools. You need a utility knife, a mixing tool/applicator, and a disposable mixing surface.
- Prepare surfaces. They must be clean and dry.
- Prepare epoxy glue for concrete. Mix equal amounts of resin and hardener.
- Apply two-part concrete epoxy.
Do I need to seal concrete before epoxy?
New slabs of concrete should be allowed to fully cure for 30-60 days before a coating is applied. If a sealer was previously used on the concrete (if water beads up on the surface), do not use epoxy. Any cracks or concrete spall should be filled and stabilized before a new epoxy coating is applied.
How long does concrete need to cure before epoxy coating?
28 day
Standard specifications recommend a minimum 28 day cure period for “green concrete”, before an epoxy floor coating or other resinous system can be applied.
How do you remove epoxy from concrete floor?
Scrape the entire floor, then sweep or vacuum up the loose glue. The more excess glue you get off the floor before using a glue remover for concrete, the better the glue remover will work. The next step is to wet the glue with the adhesive remover either with a mop or sprayer.
Is epoxy paint good for concrete floors?
One common use of epoxy paint is to finish concrete floors. Applying it in a garage makes cleaning oil drips from a vehicle easier. Epoxy paints come in a wide variety of colors and are long lasting.
How do you paint epoxy?
Spread one thin coat of epoxy or polyurethane paint. Latex or acrylic paint aren’t recommended, and may chip or peel after a short time. Cut in the edges of the floor with a paintbrush, then roll the bulk of the floor with a thin-nap roller as if you were painting a wall.
What is epoxy flooring?
Epoxy flooring material is made up of two components: resins and hardeners. It’s one of the resinous flooring systems that form seamless flooring. The resulting material is usually a very rigid plastic material that has advantages including the following: