How thick is factory auto paint?
A typical factory paint job will measure between 4.0 mils and 6.0 mils. The clear coat will generally measure between 1.5 and 2.2 mils thick. The alternative measurement is called a micron. A micron is a metric unit that equals one millionth of a meter, or 1/1000 of a millimeter.
What is original paint thickness on cars?
Typically however a vehicle from the factory will have between 4–7 mils (100–180 microns). Consistency is what is important. Measurements taken across a panel should show only small variations in thickness.
What is the expected or average paint thickness?
This thickness can be measured with a PTG. In many cases the total paint thickness on a new vehicle will have an average of roughly 120 microns.
What is good paint thickness?
Mostly, a good paint result is anything that’s above 90 microns (3.14 mills). Again, it depends on the type of the vehicle and its factory paint depth. The best way to tell if there’s still enough clear coat is to measure the average, and then you’ll know what a good result of a specific part is good.
What cars have the thickest paint?
The next, a Rolls-Royce checks in at 7.3 mils. This Jesko? Its paint is more than 30 mils thick. “The paint is the thickest and most robust of any production vehicle on the market today,” said Kosilla, “I’ve polished a lot of cars, and this one in particular is very resilient.
How can I tell the thickness of my car paint?
Checking the thickness of the paint on a car with a coating thickness gauge is easy. For most gauges, you simply have to touch the end of the probe onto the surface of a car’s panel. It will then give you a reading of what the thickness of the coating on the panel is.
How can I check the quality of my car paint?
How to assess the quality of your car paint job
- Step 1: Inspect your vehicle in a well-lit area.
- Step 2: Ensure that paints match.
- Step 3: Check for imperfections in the paint.
- Step 4: Look for paint spatter inside and out.
- Step 5: Care and maintenance.
- 15 Reasons to Choose Sheen Panel Service.
Is repainting a car as good as factory paint?
Will the paint quality of a repainted car be as good as the original OEM paint job? – Quora. No way! The quality of re-painting can never be as good as any OEM paint job. They are comparable to the quality and performance of a Mercedes Benz or a Ferrari, to that of other low priced cars.
How is car paint thickness?
The thickness of the paint you see on your car is measured in microns (µm), 1 micron is equivalent to one thousandth of a millimetre (1/1000mm). It’s comprised of three layers: Primer, Base Colour Coat and Clear Coat (lacquer).
What is a mil paint thickness?
In the U.S. the thickness of paint is expressed in mils (one mil equals 1/1000 of inch). The rest of the world expresses coating thickness in microns (1 micron = 1 millionth of a meter and 25.4 microns = . 001” inch or 1 mil).
What is the standard thickness of original car paint?
German and Japanese cars: 4-5 Mils
How do you measure paint thickness?
Traditionally a destructive test method is used to determine paint thickness. Today, the primary purpose of ultrasonic testing is to non-destructively measure the TOTAL thickness of the paint system, typically in the range of 3 to 5 mils (75 –125 μm).
Why to use a paint/coating thickness gauge?
Top 8 Best Coating Thickness Gauge Review Essential Facts About Coating Thickness Gauges. A coating thickness gauge measures the thickness of paints non-destructively. Things to Watch Out. Technical Terms. Various Types of Coating Thickness Gauges. Comparison Table Products Review.
What is the best automotive paint protection?
Cilajet has you covered…. Cilajet Aviation Grade is absolutely the best car paint protection, protecting your clear coat and keeping your car looking new throughout your ownership period. Cilajet Aviation Grade is manufactured in the U.S.A., does not contain any harsh chemicals, and is safe for the environment.