How thick are exterior apartment walls?
External walls are generally 10 to 12 inches wide. Homes that are built with rammed earth or heavy exterior masonry will have thicker walls. There is no limit to how thick an exterior wall can be.
How thick is a wall with drywall?
Most interior walls are constructed with 2-by-4 framing, and each 2-by-4 has a nominal width of 3 1/2 inches. Drywall typically covers both sides, and it’s usually 1/2 inch thick, which makes the wall 4 1/2 inches thick.
How thick are interior walls on a floor plan?
Interior walls are usually about 4 1/2 inches thick and exterior walls around 6 1/2 inches. If you’re about to draw floor plans for an existing home measure the thickness of the walls at the doors and/or windows.
How thick is drywall in an apartment?
The most common thickness of drywall used in residential interior construction is 1/2 inch. This material is recommended for walls with studs placed 16 inches on center. If the wall studs are placed 24 inches on center, a 5/8-inch drywall is recommended.
What is the most common drywall thickness?
1/2-inch
Most drywall measures 1/2-inch thick. It’s the most common choice for interior walls because they are easy to carry and hang. If weight is a concern, consider ultra-light half-inch drywall.
What thickness drywall do I need?
The most common thicknesses for general application are 3/8 inch and 1/2 inch. However, several decades ago, 1/2 inch became the industry standard. Quarter-inch drywall is often used to cover damaged plaster walls and also for curved areas because it bends easier than thicker drywall.
How thick is a interior commercial wall?
Most interior walls are constructed with 2-by-4 framing, and each 2-by-4 has a nominal width of 3 1/2 inches. Drywall typically covers both sides, and it’s usually 1/2 inch thick, which makes the wall 4 1/2 inches thick. Door jambs are typically milled to this width so the edges of the jabs come flush with the walls.
How thick should floors be?
In a typical home, the entire structure between levels can be about 12 to 14 inches thick, depending on the type of joists used and the finish materials for the floor and ceiling.
What kind of walls do apartments use?
Two of the most common forms of interior wall materials are plaster and drywall. Plaster has been used since ancient times. The earliest plaster was usually made of lime, sand, animal hair and water [source: MacDonald].
Are townhouse walls thick?
An area separation wall is a component of townhouse construction, used where townhouse share a common wall. These separation walls are extra thick, with a double layer of gypsum drywall placed in the center.
What is the thickest wall thickness for a house?
As far as standard building materials are concerned, masonry walls tend to be the thickest, and the maximum recommended thickness for walls up to 70 feet high is 12 inches. Add an extra 4 inches for each additional 70 feet in height.
What is the difference between exterior & interior wall thickness?
Both exterior and interior walls are built similarly, with the outside wall having a somewhat different makeup. The studs — or framework inside the wall — are almost always 2 inches thick and 4 inches wide. Adding a sheath of 1/2-inch drywall to both sides of an interior wall yields a standard 5-inch-thick wall.
What is the standard thickness of a wall stud?
Exterior wall thickness depends on siding material. The recommended maximum is 12 inches. Standard 2-by-4 studs are 3 1/2 inches wide and drywall is 1/2 inch thick, so interior walls are usually 4 1/2 inches thick.
What are the pros and cons of having a thick wall?
The moisture clumps insulation and rots the framing unless it has been treated with borates to prevent rot. On the plus side, thick exterior walls provide more space for insulation, which makes the home more comfortable in extreme climates and also acts as a sound barrier.