Why is my PC stuck on the boot menu?
If it is caused by bad memory in the computer or the memory slot on a computer motherboard is bad, you may follow to fix it: Try to change or reinstall the computer and restart the system in safe mode: press F8/Shift on startup. Select Safe Mode and hit Enter. Press Win + R or run MSCONFIG and click OK.
How do I get out of boot menu?
Turn on the laptop (or CTRL-ALT-DEL if you are already stuck on the boot menu) Hold down F2 (or whatever your BIOS menu key is) Go to the Security Menu and disable Secure Boot. Save and Exit.
How do I fix boot menu problems?
Fix #1: Check Boot Order
- Restart your computer.
- Press the necessary key to open BIOS menu. This key depends on your computer manufacturer and computer model.
- Go to the Boot tab.
- Change the boot order and list your computer’s HDD first. Boot Selection Menu.
- Save the settings.
- Restart your computer.
Can you fix a corrupted BIOS?
A corrupted motherboard BIOS can occur for various reasons. The most common reason why it happens is due to a failed flash if a BIOS update was interrupted. After you are able to boot into your operating system, you can then fix the corrupted BIOS by using the “Hot Flash” method.
How do you reset BIOS?
Reset the BIOS to Default Settings (BIOS)
- Access the BIOS Setup utility. See Accessing BIOS.
- Press the F9 key to automatically load the factory default settings.
- Confirm the changes by highlighting OK, then press Enter.
- To save the changes and exit the BIOS Setup utility, press the F10 key.
How do I fix dead BIOS?
You can do this one of three ways:
- Boot into the BIOS and reset it to the factory settings. If you are able to boot into the BIOS, go ahead and do so.
- Remove the CMOS battery from the motherboard. Unplug your computer and open your computer’s case to access the motherboard.
- Reset the jumper.
Is it safe to clear CMOS?
Clearing the CMOS should always be performed for a reason – such as troubleshooting a computer problem or clearing a forgotten BIOS password. There’s no reason to clear your CMOS if everything is working properly.
What is the CMOS button?
The CMOS, also known as the Complementary Metal-Oxide-Semiconductor, is a small chunk of memory used to store your computer’s BIOS or UEFI configuration. This configuration controls what your computer does on boot. If you’ve built your own computer, it should be easy to reset your CMOS.
How do I fix BIOS boot loop?
Unplug power cable from PSU. Press the power button for 20 seconds. Remove the CMOS battery and wait 5 minutes and insert CMOS battery back. Make sure to connect only the disk where Windows was installed…if you installed Windows while having only one disk on your PC.
Where is the CMOS jumper?
Locate the CMOS jumper by referring to the motherboard manual and how to clear the CMOS. In general, the CMOS jumper is three pins located near the battery. In general, CMOS jumper has positions 1–2 and 2–3. Move the jumper from the default position 1–2 to position 2–3 to clear CMOS.
Does resetting CMOS delete BIOS?
In short, no, taking your CMOS battery out just “clears” the BIOS settings. In terms of the “version” of BIOS, that doesn’t change. When you update your BIOS you’re essentially burning new instructions into a chip. The CMOS battery preserves the configuration that is often passed to those instructions.
Why is my computer stuck on the boot menu Windows 10?
Software issues A problem in the Windows operating system can also cause the system stuck on the boot menu. Sometimes, a virus or malicious program corrupts the Windows operating system files that cause the system to stuck on the boot menu.
How to fix a computer stuck in the boot loop?
If the first boot device is other than the system hard drive, the possibility of your system to stuck in the boot loop is high. To reset the BIOS, you need to restart your PC and tap F2 or any other key to enter the BIOS. After that, you should follow the tips for loading the default settings.
How to fix Lenovo stuck on boot menu in Windows 10?
Step 1: Start your PC and press F8 or Shift + F8 as soon as the Lenovo logo appears on the screen. Step 2: Select “Safe Mode” and press the Enter key. We have discussed several solutions with detailed steps that can solve the issue of Lenovo stuck on the boot menu. Follow them carefully to browse your PC in the quickest possible time.
What to do if your computer is stuck on BIOS screen?
What to Do if PC is Stuck on BIOS Screen. 1 1. Restore Default Settings of BIOS. First, you need to access BIOS settings before your reset it. Follow the steps below to do these: 2 2. Clear the CMOS (BIOS) 3 3. Use UEFI Boot and Check Your Boot Order. 4 4. Repairing Your Computer Using the Help of Windows 10 Bootable Media.