How many LED lights can you put on a dimmer?
A good rule of thumb is to allow 100W for each LED fixture so in this case, the 600W dimmer can handle only six LED fixtures. If you are meeting all of the electrical requirements of the dimmer and you are still having flicker issues, you can try adjusting the low-end trim.
Can dimmer switches be used with any light?
Most light fixtures will work with standard dimmer switches, including those with halogen and incandescent lamps. If you install line-voltage track and rail lights with incandescent bulbs, you can use dimmer switches to control their brightness. Just be sure to use a line-voltage dimmer as well.
What happens if you put a 75 watt bulb in a 60?
It simply means that the bulb, whether CFL or LED, is able to produce as much light as a 60-Watt incandescent. If your fixture is rated to accept 60 Watts, you can safely use 75W, 100W, or even 125W equal bulbs (which all draw less than 50 Watts of power) instead.
How do I know if my dimmer switch is LED compatible?
The best way to see if your current dimmer is LED compatible is to check the minimum and maximum load range of the switch itself.
How do I calculate dimmer wattage?
Common dimmer wattage ratings are 150 watts, 300 watts, 600 watts and 1000 watts….Wattage rating is usually on a sticker on the light fixture.
- Multiply the number of fixtures by the wattage rating of each fixture.
- Multiply the result by 125 \% (continuous load).
- Round up to the next dimmer wattage rating.
How many watts is a dimmer switch?
How many watts can a dimmer handle in normal conditions? Dimmer switches can handle bulbs from 1 Watt to 1000 Watts. Some dimmers can even handle different bulb types in the same circuit.
Can I use a regular dimmer switch with just the light on a ceiling?
You can just use a dimmer switch to dim the light, however the speed of the fan will also be “dimmed”. Make sure you use the right dimmer for your lamp, otherwise you can hear noise.
How do I choose a dimmer switch?
Choose a dimmer with a wattage rating that meets or exceeds the total wattage of all the light bulbs the dimmer will control. For example, if the dimmer controls a fixture with ten 75-watt bulbs, you need a dimmer rated for 750 watts or higher.
What is the LED equivalent of a 150 watt bulb?
150-watt incandescent and 50-55 watt CFL bulbs give 2600 to 2800 lumens and can be replaced with 25-28 watt LEDs.
Can I use a 60 watt bulb in a 150 watt lamp?
But maybe you want to use something even brighter? For a 60-Watt fixture, you could use a 100W, 125W, or even 150W LED equivalent because they all consume under 60-Watts!
How do I know what type of dimmer switch I have?
Determine the number of switches that control the light group. If only one switch controls the light, purchase a single-pole dimmer. If two switches control a single light or a group of lights, you will need a 3-way dimmer. Then look at the bulb type you are going to be using and pick the right type of dimmer.
What rating dimmer switch do I need?
What wattage do I need for a dimmer switch?
Make sure the wattage rating on your new dimmer is at least as high as the old one. If you’re installing a dimmer switch, keep in mind that each switch is rated to handle a maximum wattage. If you’re trying to dim six 100-watt lightbulbs, use a switch rated for at least 600 watts.
How many LED bulbs can a 500 watt dimmer switch handle?
An easy rule to remember when calculating the load for LED dimmers is to divide the stated (on the dimmer or the package) maximum load by 10. For example, a 500W dimmer switch should have no more than 50W of LED bulbs connected to it, which would equate to 10 5W bulbs.
Can a dimmer switch be used with incandescent bulbs?
Any dimmer switch is compatible with incandescent or halogen light bulbs as the following conditions are met: The dimmer switch is rated for the same voltage as the lighting application. The total wattage of all lamps is less than or equal to the maximum wattage rating on the dimmer switch.
What size switch do I need to dim 5 light fixtures?
If you’re trying to dim five 100-watt bulbs, use a switch rated for at least 600 watts. Multiply the number of fixtures by the wattage rating of each fixture. Multiply the result by 125 \% (continuous load). Round up to the next dimmer wattage rating. 5 light fixtures.