What is the wood along the bottom of a wall called?
In architecture, a baseboard (also called skirting board, skirting, wainscoting, mopboard, floor molding, or base molding) is usually wooden or vinyl board covering the lowest part of an interior wall. Its purpose is to cover the joint between the wall surface and the floor.
What are baseboards in a house?
Baseboards are the moulding or trim that covers the seam between the floor and wall. There are several baseboard styles, including beaded, ornate, smooth, square, curved, and more. Baseboards can also be a variety of colors, sizes, and heights. There are several baseboard materials, too.
What is base molding?
The base molding is the board covering the bottom of the interior wall, in the joint where the wall and the floor meet. Base is commonly used in installation of hard surface flooring to cover expansion gaps in wood/laminate flooring or to cover the cuts when installation of tile or stone has occurred.
What is a horizontal stud called?
Joists are horizontal structural members used to support floors and ceilings. They range from 2-by-6s to 2-by-12s in most houses, depending on their span and the load that must be carried, and they normally are spaced on 16-inch centers.
What is a shiplap wall?
Shiplap refers to a special type of inter-locking board, similar to tongue-and-groove but with a tighter, overlapping fit. These wooden panels are easy to install, create an effective seal, and are an increasingly popular style choice for the inside of homes—from modern to rustic.
What do you call the trim around the floor?
Baseboard is the trim that defines where the floor ends and the wall begins. It also protects your wall material from the wear and tear of mops and vacuum cleaners. Baseboard is usually thinner than door trim, which is called casing, and at least one-third wider.
What are the different types of floor molding?
Differentiate between the types of molding most commonly used in homes today—and discover which style might be right for your residence.
- Decorative Moldings. 1/11. Moldings exist in myriad forms.
- Casing. 2/11.
- Baseboard and Baseboard Styles. 3/11.
- Crown. 4/11.
- Chair Rail. 5/11.
- Picture Rail. 6/11.
- Cove. 7/11.
- Dentil. 8/11.
What is the difference between trim and baseboards?
Baseboard is the wood (or other material) board that runs between the floor and the wall. Trim is a broad term that encompasses baseboard and other trim throughout the home.
What is a trim board?
Trim boards, also called molding pieces, gracefully cover joints between different surfaces and materials. The most common applications are casings around windows and doors and base moldings at the bottom of a wall. Moldings are sold in a wide variety of patterns from simple to ornate.
What are the boards between studs called?
Studs are sandwiched between two horizontal boards called top and bottom plates. These boards are nailed or screwed to the top and bottom ends of the studs, forming the complete wall frame. Studs are usually spaced 16 in. or 24 in. apart.
What is the bottom plate?
A Bottom Plate is the piece of timber which sits on the floor and forms the bottom of the wall, carrying the stud loads to the floor joists.
What is wainscoat?
Wainscoting is a type of wall covering laid over the lower portion of a wall to contribute to the decor or support the room’s overall construction or both.