How do you backup your router?
To back up the router configuration settings:
- Launch an Internet browser from a computer or wireless device that is connected to the network.
- Enter the router user name and password. The user name is admin.
- Click ADVANCED > Administration > Backup Settings.
- Click Back Up.
- Specify a location on your network.
How do I download Cisco config?
Downloading Startup and Running Config Files from Cisco Devices
- Click the Tools tab.
- Choose Config File Manager available under the CISCO Tools category.
- To configure SNMP properties click Settings located at the top right corner or click Admin -> Settings.
- Enter the Device Name or its IP Address.
How do I download a configuration file from my router?
How do I export my router’s configuration file
- Connect your computer to the router’s Wi-Fi network (or connect the computer to the router’s LAN port using an Ethernet cable). In the browser address bar, enter 192.168.
- Go to More Functions > System Settings > Backup & Restoration. Click Export Configuration to save the .
How do I backup my WLC 2504?
1 – Backup config directly from controller GUI
- Change the IP address to the IP address of your TFTP server and change the File Name to your required backup filename.
- Your WLC backup will be downloaded to your TFTP server.
- To enable this click on the task and tick the enable box.
How do I copy a configuration file from a Cisco switch?
To copy, you can either select Edit > Copy from the text editor’s menu, or hold down the CTRL key and simultaneously press the C key. 17. Switch to the HyperTerminal window and issue the configure terminal command at the Router# prompt and select Enter.
What command in Cisco switch can help to save the startup configuration file to flash?
copy running-config startup-config
Save the Configuration Type “copy running-config startup-config” at the command line and press return on the keyboard. This will copy the current switch configuration to the non-volatile memory, which is memory that will retain its data even without power applied to it.
Which protocol is used to save the configuration of a router or a switch to a file server?
Trivial File Transfer Protocol
You want to load configuration commands via the Trivial File Transfer Protocol (TFTP).
How do I save a switch configuration?
Save the Configuration Type “copy running-config startup-config” at the command line and press return on the keyboard. This will copy the current switch configuration to the non-volatile memory, which is memory that will retain its data even without power applied to it. 3.
How do I save a Cisco configuration file?
Save running config on Cisco device Use the command copy running-config startup-config (copy run start) to overwrite the current startup config file with what is currently in the running configuration file.
How to configure Cisco switch?
Connect the switch to PuTTY with a 9-pin serial cable.
What are the commands for Cisco switches?
Cisco Switch Configuration Commands. Configure terminal: This command is used to enter the global configuration mode of the Cisco switch. Hostname: This command assigns the Cisco switch’s hostname. Enable password: This command sets the enable password of the Cisco switch.
How do you erase a Cisco router?
If you want to clear the configuration of your cisco router follow these steps: Log on to your router. Enter the privileged EXEC by typing enable command. At privileged EXEC mode type write erase, which will erase the NVRAM file system and removes all files. Confirm that you want to erase all files at prompt.
What is configuration backup?
Configuration Backup. Export a saved configuration, as a plain file, so that it may be stored on an external server, or included in a backup of a share on the appliance itself. Import a saved configuration that was previously exported from this system or another system, making it available for a restore operation.