How do I get out of Surface Pro UEFI screen?

Posted on by Author

How do I get out of Surface Pro UEFI screen?

If you can’t shut down Surface normally, press and hold the power button on your Surface for 30 seconds. Step 2: After Surface turns off, press and hold volume-up button and the power button on your Surface at the same time for at least 15 seconds, and then release both.

How do I get out of UEFI settings?

How do I disable UEFI Secure Boot?

  1. Hold down the Shift key and click Restart.
  2. Click Troubleshoot → Advanced options → Start-up Settings → Restart.
  3. Tap the F10 key repeatedly (BIOS setup), before the “Startup Menu” opens.
  4. Go to Boot Manager and disable the option Secure Boot.

How do I boot from UEFI Surface?

To load the UEFI firmware settings menu:

  1. Shut down your Surface.
  2. Press and hold the volume-up button on your Surface and at the same time, press and release the power button.
  3. When you see the Surface logo, release the volume-up button. The UEFI menu will display within a few seconds.
READ:   What is a normal size coffee pot?

How do I unfreeze my Surface Pro 4?

Press and hold the volume-up button and the power button at the same time until the screen turns off (about 15 seconds), then release both. The screen may flash the Surface logo, but continue holding the buttons down for at least 15 seconds. After you release the buttons, wait 10 seconds.

How do I reset my Surface Pro 4 UEFI?

To do this:

  1. Select Start > Settings > Update & security > Recovery.
  2. Under Advanced startup, select Restart Now.
  3. Under Choose an option, select Troubleshoot > Advanced Options > UEFI Firmware Settings, and then select Restart.

Why is my Surface stuck on the Surface screen?

Hold down the power and volume up button for about 35 seconds. Now hold down the power and volume up button again. This should boot your Surface pro 3 to a black screen that will allow you to change some settings. Just click exit when you get to that screen and the surface should boot normally.

READ:   Is Harry Kane one of the best football players?

How do I get UEFI firmware settings in Windows 10?

How to access UEFI (BIOS) using Settings

  1. Open Settings.
  2. Click on Update & Security.
  3. Click on Recovery.
  4. Under the “Advanced startup” section, click the Restart now button. Source: Windows Central.
  5. Click on Troubleshoot.
  6. Click on Advanced options.
  7. Click the UEFI Firmware settings option.
  8. Click the Restart button.

What is the Windows key for UEFI firmware settings?

How to Access UEFI Firmware Settings in Windows 10

  • Quickly press F2, F10 or F12 keys at the screen showing your system manufacturer’s logo.
  • Go to ‘Change advanced startup options’
  • Click on Restart now button.

What is the UEFI screen on Surface Pro 4?

A white screen titled Surface UEFI, or, on older models, a black screen with configuration options like Trusted Platform Module and Secure Boot Control. This is the Unified Extensible Firmware Interface screen (UEFI, formerly known as the BIOS). If you see this screen when you turn on your Surface, don’t make any configuration changes.

READ:   How do you deal with inconsistent texters?

What should I do if my surface doesn’t start?

If Windows starts after you force a shut down and restart: Install the latest Surface and Windows updates to help prevent future problems. For more info, see Install Surface and Windows updates. If Windows doesn’t start: Go to Solution 2. Start your Surface by using a USB recovery drive.

How do I create a USB recovery drive for my surface?

Insert the USB recovery drive into the USB port on your Surface, and then press and hold the volume-down button while you press and release the power button. When the Surface logo appears, release the volume-down button. For more info, see Creating and using a USB recovery drive.