What was the best machine gun of WW2?
MG42. The MG34 was followed by the MG42 light machine gun, which could fire at 1550 rpm and was lighter, faster and produced in far greater numbers than its predecessor. This was probably the most effective machine gun produced during the war.
Is the MG 34 still in use?
The MG 34 (shortened from German: Maschinengewehr 34, or “machine gun 34”) is a German recoil-operated air-cooled machine gun, first tested in 1929, introduced in 1934, and issued to units in 1936….MG 34.
| Maschinengewehr 34 | |
|---|---|
| In service | 1936–1945 (officially, German military) 1936–present (other armies) |
| Used by | See Users |
Was the M60 used in ww2?
The M60 machine gun began development in the late 1940s as a program for a new, lighter 7.62 mm machine gun. It was partly derived from German guns of World War II (most notably the FG 42 and the MG 42), but it contained American innovations as well.
What country made the MG 34?
Nazi Germany
MG 34
| Maschinengewehr 34 | |
|---|---|
| MG 34 in the Swedish Army Museum. | |
| Type | General-purpose machine gun |
| Place of origin | Nazi Germany |
| Service history |
How much does an MG42 weigh?
With a butt, for use with a bipod, the gun is 122.5 cm (48.25 inches) long. It weighs (without bipod) 10.5 kg (23.1 pounds). The MG42 is fed by a metal link belt at a cyclic rate of fire of 700–1,300 rounds per minute. It is air-cooled and has a quick-change barrel.
How much does an MG 34 weigh?
26.7 lb
MG 34
| Maschinengewehr 34 | |
|---|---|
| Mass | 12.1 kg (26.7 lb) 32 kg (70.5 lb) (with tripod) |
| Length | 1,219 mm (48.0 in) |
| Barrel length | 627 mm (24.7 in) |
| Cartridge | 7.92×57mm Mauser |
Which is more accurate MG42 or MG34?
Mg34 vs. Mg42 The 34 is more accurate than the 42 and has the selictive-fire option. The mg42 has a higher ROF than the 34 and is less accurate than the 34.
Why was the MG34 used for armored vehicles?
The reason the MG34 was used for armored vehicles was because the gun mount would attach to the barrel jacket of the MG34 and the barrel could still be changed. The MG34 is hinged in the middle on it’s longitudinal axis, and the rear half of the receiver could be twisted out of the way for barrel change without removing the gun from the mount.
How long does it take to change a barrel on MG42?
The MG42 can have a barrel changed (after 250 rounds) in about 6 seconds with an experienced gunner. The MG34 takes about 10 seconds. Both are far superior to the US competition of the day, the Browning 1919A4, which had to be partly disassembled and have the headspace reset after the change.
Can the MG42 barrel be mounted in a ball mount?
The MG42 barrel comes out the right side, so if it were mounted in a ball mount, it would have to be withdrawn within the vehicle to get the barrel out. This is the reason that the MG42 never completely replaced the MG34.