How do I connect my Elmo document camera to my computer?

How do I connect my Elmo document camera to my computer?

Making a Proper Connection

1. Plug in power cord of the Elmo.
2. Plug the power cable into the back of the Elmo device.
3. Insert the other end of the cable into the computer or laptop.
4. Turn on the projector.
5. Press the power button on the Elmo device and keep holding the button until a green warm light appears.

How do I project Elmo to my computer?

Power on the Elmo and press the Camera button to project from your Elmo. 2. To switch from the Elmo to the laptop, press the PC button on the Elmo. The signal will then pass from the computer, through the Elmo to the projector.

How do I use ELMO document camera on macbook?

Using ELMO Doc Cam on Mac

1. STEP 2: Navigate to the settings of the ELMO on the screen (icon gear on the lower right)
2. STEP 3: Scroll down in the settings and toggle ON the microphone mute button.
3. STEP 4: Scroll down and toggle ON the USB Camera.

How do I display a document camera on my laptop?

Locate the VGA cable in one of the floor boxes; attach the cable to the VGA port on your laptop or document camera. The port is located on the back or side of your laptop. Look for a monitor icon . For the document camera, select one of the VGA-out ports.

How do I connect my Elmo document camera to my Macbook?

How do I project a document camera?

Document Camera Instructions

1. Press the Doc Cam button on the touch screen control panel to turn on the projector and set it to display the document camera.
2. Press the power button on the document camera to turn it on.
3. Place the object you wish to display directly below the document camera lens.

Do you need a projector to use a document camera?

A document camera has to be connected to a projector or monitor. Ideally, though, it should be connected to a computer to allow you to do things like take and store photos and record audio and video.

How do you connect Elmo?

Connect your computer to the Elmo – connect the second cable to the. RGB in. port of your Elmo and plug the other end of the cable into the. video (screen icon) port of the computer. You are not quite done.

How to use an ELMO projector?

Switch on the power cord of the Elmo and connect it to the RGB cord of the projector.

Project both Elmo and projector into the wall.

Switch on the power button of both Elmo and projector. They will give green lights. It is ready to use. You can…

When you are done with your lecture, you can also…

What is a document camera and projector?

A document camera projector is a device used either with a document camera or built into a single unit with a document camera, in order to project images captured by the camera onto a screen or other viewing surface.

What is a document Elmo?

An Elmo™ projector is a document camera and projection system that is commonly used as a descriptive name for all such systems, regardless of who manufactures them.