Can water jet cut diamond?
Since diamond is the hardest material in the world, only the waterjet machine can cut it.” The OMAX 2626 is a high-precision waterjet machine often found in research labs, tech prototyping, and even aerospace facilities.
Can a water jet cut rubber?
Rubber Waterjet Cutting. Originally, waterjet cutting was used primarily for cutting and slicing rubber materials. Waterjet cutting rubber materials requires no abrasive and uses a small, water-only stream typically 0.005″ in diameter, to provide even the finest detail in all your rubber product needs.
Can water jet cut ceramic?
Ceramics can also be cut using a water jet, as long is their hardness is less than an 8.5 on the Mohs scale. Softer materials such as rubber and wood can even be cut with a waterjet, using the water-only nozzle without the abrasive.
Can waterjet cut hardened steel?
Waterjet machines cut all types of metals: hardened tool steel, aluminum, titanium, and a host of exotic metals that prove difficult to cut with other tools or processes. Cutting with a waterjet produces a smooth edge with no burn marks, cracking or excess burrs.
Is water the sharpest weapon in the world?
Don’t underestimate the water, press it to more than 100 MPa, and then spray it through a 0.05 mm nozzle, it becomes the sharpest knife in the world. In fact, water jet is also called water cutting, or high-pressure water jet cutting technology.
How thick of material can a waterjet cut?
Truly, a waterjet can cut up to any thickness, but tolerances will change the thicker the material being cut. Tight accuracies can be kept when cutting materials under 4 inches thick, a near net shape is achieved when cutting thicker materials.
Can you waterjet metal?
A waterjet is a tool used in machine shops to cut metal parts with a (very) high-pressure stream of water. As amazing as it sounds, if you get water flowing fast enough it can actually cut metal. Think of a waterjet as something with about 30 times the pressure of the power washer wand at your local car wash.
How thick can you water jet?
How thick can an abrasive waterjet cut? The high-level answer is that abrasive waterjets can cut through 12 inches of most materials. Many of our customers report cutting material even thicker than that. Most abrasive waterjet cutting, however, is done in material that is 3 inches thick or less.
Can a water jet cut your finger?
Hazards Specific to Jet Cutting A high-speed jet laden with abrasives is a powerful cutting tool that easily can remove fingers and more (Figure 1). The most common source of cuts in waterjet cutting is not the jet, but the slats that support the material.